Kirby Morgan SuperLite SL 27 Diving Helmet

If the diver is looking for the most compact helmet with the “snuggest” fit, the SuperLite® 27® is Kirby Morgan’s smaller unit in our selection of highest quality commercial diving helmets.

The SuperLite® 27® comes standard with the Tri-Valve® Exhaust System which provides exceptionally dry breathing under all conditions, without increasing breathing resistance. Also setting the SuperLite® 27® apart from other helmets is its water dump valve which is mounted on the port side, contributing to the shorter, more compact profile of this helmet.

The SuperFlow® 350 regulator featured on the SuperLite® 27® provides outstanding performance. With the diver adjustable system, the regulator can be “tuned” during the dive according to the workload, especially important when using a low pressure compressor with varying supply pressures.

The 455 Balanced regulator, sets a milestone in surface supplied breathing performance and is also compatible with all Kirby Morgan Helmets and BandMasks® that feature the SuperFlow® 350 or 450 regulators.
The 455 Balanced regulator is a downstream balanced poppet design, and is featured on the new KM 97 Helmet. Like the widely used SuperFlow® 350, the 455 Balanced has a multi turn bias adjustment allowing the diver to compensate for variations in supply pressure and changes in physical attitude.

The regulator body is made of 316 stainless steel, as are all its other metal components. The 455 Balanced regulator is designed and engineered to be rugged, long lasting and easy to disassemble for simple, fast, cleaning and servicing.

The 455 Balanced regulator meets all requirements of European standard EN15333-1 and is CE approved and CR rated.

CE Certification:

The SuperLite^® 27^® helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 15333-1:2008/AC:2009 (class B). It is fully CE marked with demand regulator SuperFlow® 350 and oral nasals P/N 510-690 and P/N 510-747(now standard).

What's in the box:

• SL 27 Diving Helmet- Part # 500-040 (POSTS) or 500-041 (MWP)
• Logbook w/ pen- Part # 125-001
• Helmet/Mask Bag- Part # 500-901
• Tool Kit with Pouch- Part# 525-620 (For SuperFlow 350 Regulator)
• Tool Pouch, Small - Part# 525-628 (For 455 Balanced Regulator)
• Socket Wrench, Regulator Mount Nut- Part# 525-625 (For 455 Balanced Regulator)
• Neck Dam Assembly, size Medium- Part# 510-504
• Head Cushion Assembly(Snoopy)- Part# 510-754
• Current Certification
• Test Specifications
• Warranty registration card

Air Train The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.	Defogging Steady Flow Valve Provides an additional flow of gas into the helmet for ventilation and defogging.	Emergency (EGS) Valve Supplies backup breathing gas to the diver.
Whisker Wings Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise.	Gas Supply Non-Return Valve  Commercial Rated™, It prevents loss of gas pressure in the event of umbilical damage.	Nose Block Device Nose Block Device allows the diver to block the nose to equalize ears.
SuperFlow 350 Regulator This balanced, stainless steel, Commercial Rated™ demand regulator provides easy breathing and excellent performance with low-pressure compressors.	Rapid Change Modular Communications Systems Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection.	Fiberglass and Carbon Fiber Reinforced Shell The helmet shell is hand laid up glass fiber reinforced thermal setting polyester (fiberglass) with carbon fiber reinforcement at key points for added durability. It is light and highly impact resistant, and provides a heat/cold barrier as well as being an excellent electrical nonconductor.
Side Block Multi use side block has additional ports built in to provide controlled air flow, if needed.	Silicone Oral Nasal Mask Made of silicone material which is hypo-allergenic and has a longer work life than latex.	Top Handle Handle can be removed without breaking seals, making it quick and easy to attach accessories.