Kirby Morgan KMB Bandmask 28B Full Face Diving Mask

The SuperFlow® adjustable demand regulator provide low inhalation resistance and high gas flow letting the diver breathe easier and work harder. This mask comes standard with the large tube SuperFlow® 350 regulator.
The Side Block Assembly of both the KMB 18 and 28 receives the umbilical over the shoulder in the B configuration. They both come standard with the Tri-Valve® exhaust system, and the new BandMask® BandKeepers®
The Tri-Valve® Exhaust System has less breathing resistance than the older single valve exhaust. It retrofits to all previous Kirby Morgan BandMasks®. The BandMask® BandKeepers®, coupled with the redesigned hood, not only prevent any separation of the hood from the mask, but also make it impossible for the bands to separate from the mask.
The communications connections can be either a male waterproof "plug in" type or bare wire posts.The KMB 28B BandMask® is very similar to the KMB 18. Many parts on the KMB 18B are interchangeable with the KMB 28B. The major difference between the 18 and 28 is the material of the mask frame. The KMB 18 has a hand laid fiberglass frame (yellow) while the KMB 28B frame is an extremely durable injection molded plastic (black). The relative ease of production of the KMB 28 frame allows for a lower cost and quicker delivery of this mask. Other differences include: 1) The main exhaust body of the KMB 28 is part of the frame itself and uses a #545-041 main exhaust cover 2) no comfort insert is required on the "28" 3) the face ports for the 18 and the 28 differ slightly in size.

CE Certification:

The Band Mask has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 15333-1:2008/AC:2009 (Class C). It is fully CE marked with demand regulator SuperFlow® 350 and oral nasals P/N 510-690 and P/N 510-747 (now standard).

 What's in the box:

• KMB Bandmask 28B Full Face Diving Mask- Part # 500-028 (POSTS) or 500-029 (MWP)
• Logbook w/ pen- Part # 125-001
• Helmet/Mask Bag- Part # 500-901
• Tool Kit with Pouch- Part# 525-620
• Current Certification
• Test Specifications
• Warranty registration card

SuperFlow® 350 Regulator This all metal, fully adjustable, Commercial Rated™ demand regulator provides easy breathing and excellent performance with low pressure compressors.	Emergency (EGS) Valve Supplies backup breathing gas to the diver.	Nose Block Device Allows the diver to block the nose to equalize ears.
Gas Supply Non-Return Valve Prevents loss of gas pressure in the event of umbilical damage, preventing a "squeeze".	Air Train The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.	Defogging Steady Flow Valve Provides an additional flow of gas into the helmet for ventilation and defogging.
Whisker Wings Retrofits to many previous Kirby Morgan Helmets and BandMasks®, has less breathing resistance than the older single valve exhaust while providing an extremely dry hat. The Tri-Valve® Exhaust is made of a chemical resistant compound.	Communications Communications are “non-modular” (like the SuperLite 17B helmet). When ordered with male waterproof connector (for 4 wire communications), the mask also includes bare wire posts. When ordered with bare wire posts (for 2 wire communications), the port for the mwp connector is plugged.	Head Harness (Spider) Keeps the mask in place on the divers head. The neoprene rubber spider has adjustment holes for varying the tension of the harness.
Side Block Multi use side block has additional ports built in to provide controlled air flow, if needed.	Silicone Oral Nasal Mask Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.	Stainless Steel Bands Bands hold the Hood/Face seal in place on the mask frame. They also provide the mounting studs for the Head Harness (Spider).